Euromix NPS Primer


Euromix™ NPS Primer is a solvent free primer, designed specifically for use on non porous surfaces, like; PVC, metal, glazed bricks, high density concrete and most fired tiles. NPS Primer provides an excellent base for the application of Euromix renders, textures and paints over non-absorbent surfaces.

Download Product Data Sheet

Download Safety Data Sheet

Product Summary


 Euromix™ NPS (Non Porous Surface) Primer is suitable for internal and external use as a prime coat for non-porous surfaces, where subsequent paint, texture and/or render coats are to be applied. NPS Primer is suitable for application over water based paints and waterproofing membranes. 

Product Name

Euromix NPS Primer 

Packaging

 15 litre plastic buckets. 

Appearance

In the bucket Primer appears as a blue viscous liquid. After application and upon drying Euromix Primer finishes to a slightly textured opaque blue coating. 

Application


 It is recommended that the Primer be thoroughly stirred in the bucket, using a power stirrer, prior to application. 

Do not dilute NPS Primer. 

The Acrylic Primer can be applied by long bristle brush, or by roller. Only one coat of NPS Primer is required for all situations. 

It is imperative that a ‘wet-edge’ is maintained at all time. 

Avoid applying Euromix Primers, Paints and Textures in windy conditions or in temperatures outside the range 10°C to 32°C. Keep newly coated areas protected from rain and moisture for at least twelve (12) hours, longer in the lower temperature range.

Do not apply if rain or frost is imminent or possible before the product has properly dried. Painting over wet or damp substrates will most often result in some form of failure, including possible discolouration and / or peeling.

Where rain is likely after the application of Euromix Acrylic Primer, it is required that the coating be shielded from moisture getting onto the finished surface (and into the substrate) for at least 24 hours.

Coverage


The coverage is 10 sqm per litre of product per coat.

Download Product Data Sheet

Download Safety Data Sheet

WHERE TO BUY

Drying and Curing


Drying and curing of the product is affected by type, dryness and porosity of the surface, temperature, humidity, ventilation, climate conditions and application technique and therefore drying and curing can only be given as a guide (at 25C & 50% RH):

Touch Dry

Twenty to forty minutes (20-40 min). 

Recoat

Twenty four (24) hours.

Related Products


Euromix Primers and Paints not only provide the colour for your wall or ceiling finish, they also improve the functionality of the finish system.

Euromix Acrylic Primer

Euromix™ Acrylic Primer is an acrylic polymer primer that is designed to penetrate and seal most substrates, prior to the application of Euromix finishing coatings. Euromix Acrylic Primer can be used over off-form concrete, cement based renders, fibre cement sheeting, polystyrene, PVC brick and block work.

Euromix Euroflex Paint

Euromix™ Euroflex is a high solids, acrylic based waterproofing and decorative paint coating that provides excellent flexibility, elasticity and durability on surfaces subjected to high winds, salt spray and severe weather conditions.

Euromix Sealer Primer

Euromix™ Sealer Primer is a clear, solvent based primer and sealer, which, when applied correctly, provides a highly water-resistant penetrative film over most porous building substrates.

Euromix NPS Primer

Euromix™ Acrylic Primer is an acrylic polymer primer that is designed to penetrate and seal most substrates, prior to the application of Euromix finishing coatings. Euromix Acrylic Primer can be used over off-form concrete, cement based renders, fibre cement sheeting, polystyrene, PVC brick and block work.